533 Light Fiberglass Putty 1L, hardener, FREE Metal spreader set(4) Automotive

Description

Chamäleon 533 FIBERGLASS LIGHT PUTTY BLACK LINE + hardener
FREE Metal spreader set (4 sizes)
FREE SHIPPING!
A product with unique characteristics
It weighs almost half of ordinary putty
Does not create pores
It is easy to sand, has high elasticity and excellent adhesive properties to different materials
Can be easily sanded down to zero
No need for additional fine putty application, can directly be overcoated with filling primer
Light green color
1 Liter
Made in Germany
General characteristics:
Fields of application: Car sector, machine construction
Applicable on metal, wood, concrete, fiberglass reinforced plastics
Product characteristics:
Professional glass fiber putty to fill holes, perforation corrosion, and unevennesses. The combination of the used polyester resin allows the use on all surfaces and areas, which are exposed to tension and extension.
Fiberglass light putty is a 2-component polyester fiber putty as mixture of a highly reactive, amino-preaccelerated polyester resin with different mineral, light fillers and fiberglass particles. All these products are environment-friendly fillers. Applicable on galvanized sheets, aluminum and its alloys, iron, steel plates, wood, concrete.
By use of the glass fiber particles there is a very high solidity, which, however, does not influence the very good standability. The putty is very easily to apply.
Quality and properties:
· Ease of working
· High elasticity
· Good adherence
· Very good spreadable, results in a smooth surface
· Easy to sand, even after a longer period
· Good stability, even on vertical surfaces
· No more differentiation of surfaces like zinc-plated, hot dip galvanized or aluminum and also applicable on glass fiber reinforced plastic parts
· Resistant to weak acids and bases, propellants, solvents, water and de-icing salt
· Free of asbestos and silicone
Using instructions:
Before use, carefully read and observe the warning texts on the label!
Application
· The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.
· Take the requested portion of putty compound out of the can and mix it well with the corresponding quantity of hardener.
· Apply the mixed material in the desired layer thickness.
· Clean tools immediately after use, if necessary with a nitro thinner.
· Do not return mixed material into the can.
· After approx. 20-30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.